| Author |
Message |
al99999
Guest
|
 Posted:
Thu Dec 15, 2005 5:15 pm Post subject:
Digilent SRAM Controller |
|
|
Hi,
I was wondering if anybody had designed a vhdl sram controller for the
Digilent Memory Expansion board that is designed for the spartan 3
starter kit. It is just two ISSI IS61LV5128AL sram chips. I have
tried writing a controller but cant seem to get it to work!!
Thank a lot,
Alastair |
|
| Back to top |
|
 |
al99999
Guest
|
| Posted:
Thu Dec 15, 2005 5:15 pm Post subject:
Re: Digilent SRAM Controller |
|
|
Thanks, trying to use VIO in chipscope with the code below and getting
the following error:
ERROR:Xst:2091 Different types for port <async_in> on entity and
component for <vio>.
Any ideas?
Thanks
entity vio_top is
Port(
control: in std_logic_vector(35 downto 0);
async_in: in std_logic_vector(7 downto 0)
);
end vio_top;
architecture structure of vio_top is
-------------------------------------------------------------------
--
-- VIO core component declaration
--
-------------------------------------------------------------------
component vio
port
(
control : in std_logic_vector(35 downto 0);
async_in : in std_logic_vector(7 downto 0)
);
end component;
begin
-------------------------------------------------------------------
--
-- VIO core instance
--
-------------------------------------------------------------------
i_vio : vio
port map
(
control => control,
async_in => async_in
);
end structure; |
|
| Back to top |
|
|
Antti Lukats
Guest
|
| Posted:
Thu Dec 15, 2005 5:15 pm Post subject:
Re: Digilent SRAM Controller |
|
|
"al99999" <alastairlynch@gmail.com> schrieb im Newsbeitrag
news:1134651034.610713.142150@f14g2000cwb.googlegroups.com...
| Quote: | Hi,
I was wondering if anybody had designed a vhdl sram controller for the
Digilent Memory Expansion board that is designed for the spartan 3
starter kit. It is just two ISSI IS61LV5128AL sram chips. I have
tried writing a controller but cant seem to get it to work!!
Thank a lot,
Alastair
|
SRAM doesnt need an controller, just connect it to whatever you want, if you
did it right and the hardware is ok it will work.
for EDK just add an EMC IP core to the SoC and setup the port connection in
the ucf file, thats should be it.
Antti |
|
| Back to top |
|
|
al99999
Guest
|
| Posted:
Thu Dec 15, 2005 5:16 pm Post subject:
Re: Digilent SRAM Controller |
|
|
Thanks, I'm not using EDK, only ISE, so I need a simple controller for
the CE, OE and WE pins and to put the data and address on the correct
buses at the right times. |
|
| Back to top |
|
|
Antti Lukats
Guest
|
| Posted:
Thu Dec 15, 2005 5:16 pm Post subject:
Re: Digilent SRAM Controller |
|
|
"al99999" <alastairlynch@gmail.com> schrieb im Newsbeitrag
news:1134655074.184301.148800@g49g2000cwa.googlegroups.com...
| Quote: | Thanks, I'm not using EDK, only ISE, so I need a simple controller for
the CE, OE and WE pins and to put the data and address on the correct
buses at the right times.
that is just plain wires, if you have some circuitry that the SRAM can be |
connected.
if you have trouble then just use VIO in chipscope, connected the SRAM to
VIO pins and check the that the sram is really working properly, then go
ahead and check your desing
Antti |
|
| Back to top |
|
|
Leon
Guest
|
|
| Back to top |
|
|
Brian Davis
Guest
|
| Posted:
Fri Dec 16, 2005 7:45 am Post subject:
Re: Digilent SRAM Controller |
|
|
al99999 wrote:
| Quote: | Thanks, I'm not using EDK, only ISE, so I need a simple controller for
the CE, OE and WE pins and to put the data and address on the correct
buses at the right times.
|
fpga-cpu group threads about async SRAM strobe & OE timing:
http://groups.yahoo.com/group/fpga-cpu/messages/539?threaded=1
http://groups.yahoo.com/group/fpga-cpu/messages/2039?threaded=1
fpga-cpu post with S3 kit SRAM tester:
http://groups.yahoo.com/group/fpga-cpu/message/2177
The archive for that is here
ftp://members.aol.com/fpgastuff/ram_test.zip
And a post on re-compiling it under 7.1 :
http://groups.google.com/group/comp.arch.fpga/msg/8955e7209e0c3929
That example includes pipelined SRAM control logic (registered address,
data, and tristate contols in IOB registers, gated write pulse ) for
the Xilinx/Digilent S3 eval kit.
I've started a newer version of that, using a DCM duty cycle tweak,
that works at around 60 Mhz with address & data lines all in SLOW
slew rate mode, I'll probably update that archive file sometime next
month.
Brian |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in