bboris
Guest
|
 Posted:
Mon Dec 13, 2004 7:33 pm Post subject:
Problem programming Renesas MCU M38227ECFP |
|
|
Hello,
Do somebody have expirience with programming the M38227ECFP ?
I have problem with programming M38227ECFP MCU from Renesas.
I use Hi-Lo Systems ALL-11C programmer, and PCA4738F adapter.
Adapter is produced by Renesas, and is used in such way that MCU is acting
like EPROM (M5M27c101) memory to programmer. So, with proper memory mapping,
it should work fine....
but :
while programming MCU via adapter, programmer SW report me a error, at first
address.
Thanks for your response
Boris |
|
Ed Beroset
Guest
|
| Posted:
Thu Dec 16, 2004 4:41 am Post subject:
Re: Problem programming Renesas MCU M38227ECFP |
|
|
bboris wrote:
| Quote: | Hello,
Do somebody have expirience with programming the M38227ECFP ?
|
Yes, some, but not recent.
| Quote: | I have problem with programming M38227ECFP MCU from Renesas.
I use Hi-Lo Systems ALL-11C programmer, and PCA4738F adapter.
Adapter is produced by Renesas, and is used in such way that MCU is acting
like EPROM (M5M27c101) memory to programmer. So, with proper memory mapping,
it should work fine....
but :
while programming MCU via adapter, programmer SW report me a error, at first
address.
|
If I recall correctly, the first 0x80 bytes of that part should not be
programmed. I don't have a data book handy, but is there a way that you
can skip the first 128 bytes? I use a Mitsubishi, er, Renesas-provided
programmer and so it takes care of all of the particulars for me.
Ed |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in