| Author |
Message |
Per Ekman
Guest
|
 Posted:
Mon Dec 06, 2004 6:12 pm Post subject:
Re: Pretty good explanation of x86-64 by HP |
|
|
Tony Hill <hilla_nospam_20@yahoo.ca> writes:
| Quote: | On 06 Dec 2004 11:17:19 +0100, Per Ekman <pek@pdc.kth.se> wrote:
Yousuf Khan <bbbl67@ezrs.com> writes:
Yeah, but that's why I think AMD insists on calling their multiprocessor
connection scheme as SUMO (Sufficiently Uniform Memory Organization),
rather than NUMA. It's not worth headaching over such small differences
in latency, is basically what they're saying.
It's a bit of a crap argument isn't it? Even if the latency is small,
the fact that it's a NUMA system impacts performance (potentially by a
lot) as the available memory bandwidth is coupled to where you place
your data.
It does, but the difference is small, usually less than 10% and often
much closer to 0%.
|
And sometimes 50%...
| Quote: | When well over 90% of your memory access is coming from cache anyway
and (assuming a totally random distribution in a strictly UMA setup)
50% of your memory access is going to be local, most of the
performance difference is lost in the noise.
|
What you are saying is that if the application runs well on a NUMA
machine it will run well on the Opteron. The problem is if the
application _doesn't_ run well on a NUMA box, then it becomes
important to know that this machine is in fact a NUMA machine.
| Quote: | Besides, remember that even in a classic UMA environment (ie a 2P or
4P Xeon server... or even a single-processor system) you STILL have
differences in latency depending on where in memory your data resides
due to open vs. closed pages, TLB misses, etc.
|
I'm not talking about latency here, I'm talking about bandwidth. Are
your main memory references all going to the same memory controller or
are they shared among the controllers in the system? That's the crux
of the matter.
| Quote: | Classic example is OpenMP parallelized STREAM. Parallelize all the
loops except the data initialization loop on a system with hard memory
affinity (such as Linux), then parallelize _all_ the loops and explain
how the difference is "not worth headaching over".
Most users don't use their computer to run STREAM though. Even in the
HPC community where memory bandwidth is king, STREAM is still a rather
extreme case.
|
I admit I'm from the HPC-sector and memory bandwidth is very important
to many applications here. STREAM is an extreme case in some sense,
but the performance differences it can uncover are by no means
insignificant for real codes. Shared memory MPI is one example,
clearly not an uncommon software in HPC.
| Quote: | Bottom line IMO is that pretending that the system isn't NUMA is doing
customers a disservice.
I've said it before and I'll say it again: Hardware is cheap,
software is expensive. It would be a true disservice to your
customers to tell them to spend thousands upon thousands of dollars
changing all their software for the small improvement in performance
equal to a few hundred dollars of hardware costs.
|
It's a disservice not to let the customers decide themselves. If their
code is memory bandwidth limited and runs poorly on NUMA systems then
you're doing them a disservice by selling them a system where they
_have_ to change their software to get it to run well without telling
them about it.
| Quote: | They should know that treating the system as a UMA one is a bad idea.
Spending lots of money to make all your software NUMA is a bad idea
when treating it as UMA and throwing a tiny amount of extra hardware
at the job will do the trick. That's all that AMD is getting at.
Besides, they do recognize that it is NUMA, just that they are saying
you don't NEED to worry about that if you don't want to because for
the vast majority of times the performance difference is lost in the
noise.
|
It's a pretty strange argument in my eyes, "If you ignore the
applications that run poorly because of property X, then it makes
sense to downplay property X." True, but not helpful if you have such
an application.
*p |
|
| Back to top |
|
 |
Eugene Nalimov
Guest
|
| Posted:
Mon Dec 06, 2004 10:51 pm Post subject:
Re: Pretty good explanation of x86-64 by HP |
|
|
"Greg Lindahl" <lindahl@pbm.com> wrote in message
news:41b45512$1@news.meer.net...
| Quote: | ...
These benchmarks were run with the best Opteron compiler
...
|
Visual C?
:-)
Thanks,
Eugene |
|
| Back to top |
|
|
Rob Stow
Guest
|
| Posted:
Mon Dec 06, 2004 11:39 pm Post subject:
Re: Pretty good explanation of x86-64 by HP |
|
|
George Macdonald wrote:
| Quote: | On Sun, 05 Dec 2004 17:37:16 GMT, Rob Stow <rob.stow.nospam@shaw.ca> wrote:
George Macdonald wrote:
On Sun, 05 Dec 2004 01:02:11 -0500, Yousuf Khan <bbbl67@ezrs.com> wrote:
I found this whitepaper from HP to be pretty good, it is surprisingly
candid, considering HP was the coinventor of the Itanium. It does a
pretty good job of explaining and summarizing the similarities and
differences between AMD64 and EM64T, and their comparison to the
Itanium's IA64 instruction set. AMD64 and EM64T are "broadly
compatible", but IA64 is a different animal altogether.
Yousuf Khan
http://h200001.www2.hp.com/bc/docs/support/SupportManual/c00238028/c00238028.pdf
Hmm and the following quote: "However, the latency difference between local
and remote accesses is actually very small because the memory controller is
integrated into and operates at the core speed of the processor, and
because of the fast interconnect between processors." is relevant to
another discussion here. I wish we could get a firm answer on this one.
Not sure if this is exactly what you are looking for in the
way of a "firm answer", but the latencies in a Opteron system are:
0 hops 80 ns uniprocessor (Local access)
100 ns multiprocessor (Local access, with cache snooping on other processors)
1 hop 115 ns
2 hops 150 ns
3 hops 190 ns
I couldn't find my original source for those numbers, and
the two and three hop numbers above are a little higher
than I remembered them as being. This time around I got
them from this thread:
http://www.aceshardware.com/forum?read=80030960
That thread refers to this article:
http://www.digit-life.com/articles2/amd-hammer-family/
which gives slightly different numbers for a 2 GHz Opteron
with DDR333:
Uni-processor system: 45 ns
Dual-processor system: 0-hop - 69 ns, 1-hop - 117 ns.
Four-processor system: 0-hop - 100 ns, 1-hop - 118 ns, 2-hop - 136 ns.
I don't know if any of the numbers above are for cache misses
or if they are averages that include both hits and misses.
Thanks for the data but no I guess I should have highlighted better what I
was getting at: "the memory controller is integrated into and operates at
the core speed of the processor", which is what was being
discussed/disputed in another thread.
I haven't been able to find any hard data from AMD on where the clock
domain boundaries are in the Opteron/Athlon64 but if the memory controller
is not operating at "core speed" it's now at the stage of Internet
Folklore.
|
Ah, that one is much easier to answer. ;-)
Straight from the horse's mouth:
http://www.amd.com/us-en/Processors/ProductInformation/0%2C%2C30_118_4699_7981%5E7983%2C00.html
"By running at the processor’s core frequency, an integrated
memory controller greatly increases bandwidth directly available
to the processor at significantly reduced latencies." |
|
| Back to top |
|
|
Yousuf Khan
Guest
|
| Posted:
Tue Dec 07, 2004 4:36 am Post subject:
Re: Pretty good explanation of x86-64 by HP |
|
|
keith wrote:
| Quote: | I'd say that because in small systems (less than 8 CPUs), Opterons are
coherent in hardware thus sufficiently tightly coupled to be called UMA,
as far as the user is concerned.
|
Yes, exactly my point, it's more or less UMA in the upto 8 processor
range. After that, then you can start thinking of it as NUMA. But having
upto 8 processors being treated as UMA is quite a lot.
Yousuf Khan |
|
| Back to top |
|
|
Yousuf Khan
Guest
|
| Posted:
Tue Dec 07, 2004 4:46 am Post subject:
Re: Pretty good explanation of x86-64 by HP |
|
|
Per Ekman wrote:
| Quote: | It's a bit of a crap argument isn't it? Even if the latency is small,
the fact that it's a NUMA system impacts performance (potentially by a
lot) as the available memory bandwidth is coupled to where you place
your data.
|
Actually, there was a story here not so long ago where one of the Linux
distros had been optimized up with NUMA assumptions, and it actually ran
/slower/ than a non-NUMA kernel. In other words the Linux kernel might
have spent more time making complex decisions about memory placement
than it was actually going to save from the latencies.
Accessing memory through the Hypertransport links should not be any
worse than the traditional front-side bus arrangement like in Intel
processors. So it will match the Intel architectures that way, at the
very least. And whenever it goes through its own local memory
controllers, it blows the Intel architectures away.
Yousuf Khan |
|
| Back to top |
|
|
George Macdonald
Guest
|
| Posted:
Tue Dec 07, 2004 5:30 am Post subject:
Re: Pretty good explanation of x86-64 by HP |
|
|
On Mon, 06 Dec 2004 18:39:46 GMT, Rob Stow <rob.stow.nospam@shaw.ca> wrote:
| Quote: | George Macdonald wrote:
On Sun, 05 Dec 2004 17:37:16 GMT, Rob Stow <rob.stow.nospam@shaw.ca> wrote:
snip |
| Quote: | Thanks for the data but no I guess I should have highlighted better what I
was getting at: "the memory controller is integrated into and operates at
the core speed of the processor", which is what was being
discussed/disputed in another thread.
I haven't been able to find any hard data from AMD on where the clock
domain boundaries are in the Opteron/Athlon64 but if the memory controller
is not operating at "core speed" it's now at the stage of Internet
Folklore.
Ah, that one is much easier to answer. ;-)
Straight from the horse's mouth:
http://www.amd.com/us-en/Processors/ProductInformation/0%2C%2C30_118_4699_7981%5E7983%2C00.html
"By running at the processor’s core frequency, an integrated
memory controller greatly increases bandwidth directly available
to the processor at significantly reduced latencies."
|
Ah so there we have it... assuming this has been approved by the technical
folks.:-) BTW I notice that AMD seems to cutting back on the depth of info
in their technical docs - the Product Data Sheets now consist of one
page... a far cry from the excruciating detail on cache operation etc. we
used to get.
Rgds, George Macdonald
"Just because they're paranoid doesn't mean you're not psychotic" - Who, me?? |
|
| Back to top |
|
|
keith
Guest
|
| Posted:
Tue Dec 07, 2004 6:37 am Post subject:
Re: Pretty good explanation of x86-64 by HP |
|
|
On Sun, 05 Dec 2004 23:29:08 -0800, Greg Lindahl wrote:
| Quote: | In article <8c97r0hqh2sqf8sh89ut3153lpdmddfs76@4ax.com>,
George Macdonald <fammacd=!SPAM^nothanks@tellurian.com> wrote:
I haven't been able to find any hard data from AMD on where the clock
domain boundaries are in the Opteron/Athlon64 but if the memory controller
is not operating at "core speed" it's now at the stage of Internet
Folklore.
Note that the STREAM bandwidth and lmbench latency changes with every
cpuspeedbump. So clearly part of the memory controller is at the cpu
core frequency, or a related frequency, and not at the HT frequency,
or the SDRAM external bus frequency.
|
That does *not* mean that the memory corntoller runs at the core speed.
| Quote: | It would be nuts to assume such. Would you assume the cashes of the
PII run at the the I/O bus speed?
|
| Quote: | Please reduce the cross-post. Followups set to a group I read.
|
Isn't his a rather egotistical statement? "I don't read other
groups, so no one else matters!" Hint: Others are reading this thread
from other groups! It's posted to *three* related groups (hardly a breech
of USENET protocol).
--
Keith |
|
| Back to top |
|
|
John Savard
Guest
|
| Posted:
Tue Dec 07, 2004 7:04 am Post subject:
Re: Pretty good explanation of x86-64 by HP |
|
|
On Sun, 05 Dec 2004 01:02:11 -0500, Yousuf Khan <bbbl67@ezrs.com> wrote,
in part:
| Quote: | I found this whitepaper from HP to be pretty good, it is surprisingly
candid, considering HP was the coinventor of the Itanium. It does a
pretty good job of explaining and summarizing the similarities and
differences between AMD64 and EM64T, and their comparison to the
Itanium's IA64 instruction set. AMD64 and EM64T are "broadly
compatible", but IA64 is a different animal altogether.
http://h200001.www2.hp.com/bc/docs/support/SupportManual/c00238028/c00238028.pdf
|
I would have preferred if you had given the URL of a page with a *link*
on it to this manual. That would make it easier to back-navigate for
other items of related interest, and it would have meant that the manual
could be downloaded with a right-click without waiting for the browser
plug-in to display the whole manual.
On page 13, under the heading "Power Considerations", I noticed a real
whopper. Or, at least, what _seemed_ to me to be a real whopper
initially.
It is true that for a given implementation, a higher clock speed means
more power consumption. It takes more power to make gates switch faster.
However, if a higher clock speed is obtained by splitting the pipeline
into more itty-bitty pieces, for the same level of instruction latency,
then one still has the same number of gates, each consuming the same
amount of power. (Except for the overhead of the pipelining process...
and one more thing to be noted later.)
What is the point of splitting up a pipeline into smaller pieces? Is it
to put more megahertz in the ad copy? No, it is so that more
instructions can be executing, in different stages, at once. (Which
means that a Pentium IV ought to have explicit vector instructions. Yes,
it has a separate instruction cache and data cache, but there's still
only one bus to *main memory*, and caches do have to get filled from
somewhere.)
Since CMOS gates only consume power when they are changing state, unused
elements of a non-pipelined ALU are not consuming power, so it may well
be that a 14-stage pipelined ALU can consume twice as much power as a
7-stage pipelined ALU.
But that will be because twice as much of it is in use, not because it
is going "twice as fast".
Since they are still sort of right, even if for the wrong reason,
perhaps all I am criticizing is an oversimplification here. But I think
that this can lead to a profound misconception of how microprocessors
work.
John Savard
http://home.ecn.ab.ca/~jsavard/index.html |
|
| Back to top |
|
|
Rob Stow
Guest
|
| Posted:
Tue Dec 07, 2004 7:15 am Post subject:
Re: Pretty good explanation of x86-64 by HP |
|
|
George Macdonald wrote:
| Quote: | On Mon, 06 Dec 2004 18:39:46 GMT, Rob Stow <rob.stow.nospam@shaw.ca> wrote:
George Macdonald wrote:
On Sun, 05 Dec 2004 17:37:16 GMT, Rob Stow <rob.stow.nospam@shaw.ca> wrote:
snip
Thanks for the data but no I guess I should have highlighted better what I
was getting at: "the memory controller is integrated into and operates at
the core speed of the processor", which is what was being
discussed/disputed in another thread.
I haven't been able to find any hard data from AMD on where the clock
domain boundaries are in the Opteron/Athlon64 but if the memory controller
is not operating at "core speed" it's now at the stage of Internet
Folklore.
Ah, that one is much easier to answer. ;-)
Straight from the horse's mouth:
http://www.amd.com/us-en/Processors/ProductInformation/0%2C%2C30_118_4699_7981%5E7983%2C00.html
"By running at the processor’s core frequency, an integrated
memory controller greatly increases bandwidth directly available
to the processor at significantly reduced latencies."
Ah so there we have it... assuming this has been approved by the technical
folks.:-) BTW I notice that AMD seems to cutting back on the depth of info
in their technical docs - the Product Data Sheets now consist of one
page... a far cry from the excruciating detail on cache operation etc. we
used to get.
|
The "Product Data Sheets" are indeed so brief as to be
virtually useless, but there is still a wealth of PDFs
that provide details about just about everything.
The useless Product Data Sheet heads the list of
"AMD Opteron™ Processor Tech Docs" at
http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_739_9003,00.html
but the other PDFs there have mind numbing details about
every little thing that does not give away trade secrets.
For example, read the "BIOS and Kernel Developer's Guide
for AMD Athlon™ 64 and AMD Opteron™ Processors". |
|
| Back to top |
|
|
del cecchi
Guest
|
| Posted:
Tue Dec 07, 2004 7:16 am Post subject:
Re: Pretty good explanation of x86-64 by HP |
|
|
"John Savard" <jsavard@excxn.aNOSPAMb.cdn.invalid> wrote in message
news:41b50db1.4580547@news.ecn.ab.ca...
| Quote: | On Sun, 05 Dec 2004 01:02:11 -0500, Yousuf Khan <bbbl67@ezrs.com
wrote,
in part:
|
OK, I wont trim the wonderful newsgroup list, all of whose readers are
breathlessly awaiting my imortal prose....
| Quote: |
I found this whitepaper from HP to be pretty good, it is surprisingly
candid, considering HP was the coinventor of the Itanium. It does a
pretty good job of explaining and summarizing the similarities and
differences between AMD64 and EM64T, and their comparison to the
Itanium's IA64 instruction set. AMD64 and EM64T are "broadly
compatible", but IA64 is a different animal altogether.
http://h200001.www2.hp.com/bc/docs/support/SupportManual/c00238028/c002
38028.pdf
I would have preferred if you had given the URL of a page with a
*link*
on it to this manual. That would make it easier to back-navigate for
other items of related interest, and it would have meant that the
manual
could be downloaded with a right-click without waiting for the browser
plug-in to display the whole manual.
|
What braindamaged newsreader are you using that won't let you right
click the link in the newsreader? Even OE does that. So quit whining
and switch to a decent newsreader.
| Quote: |
On page 13, under the heading "Power Considerations", I noticed a real
whopper. Or, at least, what _seemed_ to me to be a real whopper
initially.
It is true that for a given implementation, a higher clock speed means
more power consumption. It takes more power to make gates switch
faster.
Probably referring to that esoteric equation P= (sf)*.5*C*V**2 which you |
may have encountered. Or perhaps I=Cdv/dt.
| Quote: | However, if a higher clock speed is obtained by splitting the pipeline
into more itty-bitty pieces, for the same level of instruction
latency,
then one still has the same number of gates, each consuming the same
amount of power. (Except for the overhead of the pipelining process...
and one more thing to be noted later.)
If one adds pipe stages one has more gates and more latches and more |
clock drivers. And the power per gate goes up because of the higher
frequency.
| Quote: |
What is the point of splitting up a pipeline into smaller pieces? Is
it
to put more megahertz in the ad copy? No, it is so that more
instructions can be executing, in different stages, at once. (Which
means that a Pentium IV ought to have explicit vector instructions.
Yes,
it has a separate instruction cache and data cache, but there's still
only one bus to *main memory*, and caches do have to get filled from
somewhere.)
|
Actually one reason for intel to "superpipeline" was to jack up the freq
for the ad copy.
You lost me with the "Pentium IV ought to have explicit vector
instructions" leap.
| Quote: |
Since CMOS gates only consume power when they are changing state,
unused
elements of a non-pipelined ALU are not consuming power, so it may
well
be that a 14-stage pipelined ALU can consume twice as much power as a
7-stage pipelined ALU.
Or maybe 4 times, if the freq is double.
But that will be because twice as much of it is in use, not because it
is going "twice as fast".
|
Clearly they are using "twice as fast" to mean "double the frequency".
Why do you find that so hard to understand?
| Quote: |
Since they are still sort of right, even if for the wrong reason,
perhaps all I am criticizing is an oversimplification here. But I
think
that this can lead to a profound misconception of how microprocessors
work.
|
What ARE you talking about?
Del Cecchi. |
|
| Back to top |
|
|
Per Ekman
Guest
|
| Posted:
Tue Dec 07, 2004 1:04 pm Post subject:
Re: Pretty good explanation of x86-64 by HP |
|
|
Yousuf Khan <bbbl67@ezrs.com> writes:
| Quote: | Per Ekman wrote:
It's a bit of a crap argument isn't it? Even if the latency is small,
the fact that it's a NUMA system impacts performance (potentially by a
lot) as the available memory bandwidth is coupled to where you place
your data.
Actually, there was a story here not so long ago where one of the Linux
distros had been optimized up with NUMA assumptions, and it actually ran
/slower/ than a non-NUMA kernel. In other words the Linux kernel might
have spent more time making complex decisions about memory placement
than it was actually going to save from the latencies.
|
And the conclusion was that a multi-CPU Opteron system must then be
UMA, rather than that the NUMA "optimizations" were crap?
| Quote: | Accessing memory through the Hypertransport links should not be any
worse than the traditional front-side bus arrangement like in Intel
processors. So it will match the Intel architectures that way, at the
very least.
|
If your 4-way system with 4 separate memory controllers matches the
memory bandwidth on a shared-bus 1P system that's good enough??
*boggle*
| Quote: | And whenever it goes through its own local memory controllers, it
blows the Intel architectures away.
|
Latency-wise perhaps, bandwidth-wise I doubt it but feel free to prove
me wrong.
You can't tout the scaling advantage of a NUMA approach while
pretending that it isn't NUMA. Well you can, but IMO it's dishonest
and self-defeating.
I _like_ the Opteron systems, they have great performance and I work
with them daily. However I would hate them if I didn't know that they
were NUMA because important codes would run terribly slowly under UMA
assumptions.
NUMA is _NOT_ only about latency!
*p |
|
| Back to top |
|
|
Michael Woodacre
Guest
|
| Posted:
Tue Dec 07, 2004 2:32 pm Post subject:
Re: Pretty good explanation of x86-64 by HP |
|
|
Yousuf Khan wrote:
| Quote: | Per Ekman wrote:
It's a bit of a crap argument isn't it? Even if the latency is small,
the fact that it's a NUMA system impacts performance (potentially by a
lot) as the available memory bandwidth is coupled to where you place
your data.
Actually, there was a story here not so long ago where one of the Linux
distros had been optimized up with NUMA assumptions, and it actually ran
/slower/ than a non-NUMA kernel. In other words the Linux kernel might
have spent more time making complex decisions about memory placement
than it was actually going to save from the latencies.
Accessing memory through the Hypertransport links should not be any
worse than the traditional front-side bus arrangement like in Intel
processors. So it will match the Intel architectures that way, at the
very least. And whenever it goes through its own local memory
controllers, it blows the Intel architectures away.
|
As Per correctly points out, it's not just latency, but also bandwidth
that is key in NUMA.
For example, if I have a process on Opteron A, that is reading data from
Opteron B, then I can only read at Hypertransport rate, which is
something like 2.7GB of data in one direction (that's the best data rate
number I have for HT - if someone has a better one I'd be happy to use
that - note that this is user data, not protocol overhead). This is
quite different to the local bandwidth of memory directly connected to
Opteron A. Hence NUMA awareness is important.
This is different for example to the SGI Altix Bx2 system where an
Itanium can read at the full bus rate (local or remote). Clearly the
Altix architecture had a different set of tradeoffs made, to match the
requirements of SGIs customer base.
BTW, I think Opterons have some nice characteristics and for certain
workloads are attractice, but they are not the best solution to all
problems as some people seem to want to claim.
Another example would be making sure that people understand that when
Opteron goes dual core, unless you double the memory bandwidth
available, you effectively cut the bandwidth per core in half. This will
impact some workloads quite dramatically. Has AMD made public statements
about supporting higher local bandwidth for the dual core chip?
Cheers,
Mike
> Yousuf Khan |
|
| Back to top |
|
|
Grumble
Guest
|
| Posted:
Tue Dec 07, 2004 2:34 pm Post subject:
Re: Pretty good explanation of x86-64 by HP |
|
|
Eugene Nalimov wrote:
| Quote: | Greg Lindahl wrote:
These benchmarks were run with the best Opteron compiler
Visual C?
:-)
|
Maybe he meant GCC!
;-) |
|
| Back to top |
|
|
Janne Blomqvist
Guest
|
| Posted:
Tue Dec 07, 2004 6:11 pm Post subject:
Re: Pretty good explanation of x86-64 by HP |
|
|
In article <41B578C0.1000400@sgi.com>, Michael Woodacre wrote:
| Quote: | Another example would be making sure that people understand that when
Opteron goes dual core, unless you double the memory bandwidth
available, you effectively cut the bandwidth per core in half. This will
impact some workloads quite dramatically. Has AMD made public statements
about supporting higher local bandwidth for the dual core chip?
|
No public statements that I know of, but there are rumors that the
90nm Opterons, due Real Soon Now, will support DDR2 in addition to
plain old DDR. See e.g.
http://www.xbitlabs.com/news/cpu/display/20040212022200.html
By the time dual core Opterons arrive, I suspect that DDR2-800 will
also be available, thus providing twice the memory BW compared to the
current single core offerings using DDR-400.
--
Janne Blomqvist |
|
| Back to top |
|
|
Grumble
Guest
|
| Posted:
Tue Dec 07, 2004 7:09 pm Post subject:
Re: Pretty good explanation of x86-64 by HP |
|
|
Del Cecchi wrote:
| Quote: | What braindamaged newsreader are you using that won't let you right
click the link in the newsreader? Even OE does that. So quit whining
and switch to a decent newsreader.
|
Speaking of brain-damaged newsreaders, take a look at the mess yours
did when you quoted John's message. I rest my case. |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in