| Author |
Message |
mc
Guest
|
 Posted:
Thu Dec 23, 2004 11:09 pm Post subject:
The big picture - Cheap chips, cheap/free compilers? |
|
|
Greetings,
I've done a good bit of microcontroller programming in the past but have
been mostly away from it for a few years. When last active, I was mostly
using PICs with MPLAB and assembly language, and some 8051-architecture
chips with ASM51. I have a PICstart-Plus and, at work, a universal
programmer. Mostly, I do small, simple things that involve precise timing.
That is, my microcontroller projects are more electronics than computers.
What is the current situation regarding cheap, easy-to-use chips and
development tools? Is the best choice still PIC and MPLAB? What about free
compilers? In particular, are the following well regarded?
- HiTech PICC Lite (how well does it mesh with MPLAB?)
- BASCOM LT (for 8051; and for what else?)
- MikroBASIC for PIC (usable within MPLAB?)
- MikroPascal for PIC (usable within MPLAB?)
I am not particularly attached to the PIC architecture except that I have
quite a few chips on hand.
I know all the major high-level programming languages (C, Basic, Pascal,
etc.) and have no qualms about using them; that is, there are none that I
intensely dislike.
Also, where are the good, moderated, web-accessible forums for discussing
embedded design these days? The Usenet newsgroups seem to be dying.
Any advice and suggestions?
Many thanks! |
|
| Back to top |
|
 |
Fred*
Guest
|
| Posted:
Fri Dec 24, 2004 7:56 am Post subject:
Re: The big picture - Cheap chips, cheap/free compilers? |
|
|
You could also look at the Z8 Encore! family from Zilog.. really nice mcu
with many peripheral functions that the others didn't offer or they can't
run concurrently (SPI, I2C, SCI -with IrdA possibilities-..) and the dev kit
with all needed software for only 39$..
but you can even develop for free, because the prog/debug interface need
only an RS232 adaptor and you can find a free assembler here :
http://john.ccac.rwth-aachen.de:8000/as/download.html
the web page wasn't really updated since a moment, but there is always the
last release available for download..
(I contacted the author and he will add the last two instructions -that
Zilog added in the documentation- in the next release)
and there are free programmer & debugger software available here :
http://z8encore.sourceforge.net/ |
|
| Back to top |
|
|
Leon Heller
Guest
|
| Posted:
Fri Dec 24, 2004 7:56 am Post subject:
Re: The big picture - Cheap chips, cheap/free compilers? |
|
|
"mc" <mc_no_spam@uga.edu> wrote in message
news:41cb0e95$1@mustang.speedfactory.net...
| Quote: | Greetings,
I've done a good bit of microcontroller programming in the past but have
been mostly away from it for a few years. When last active, I was mostly
using PICs with MPLAB and assembly language, and some 8051-architecture
chips with ASM51. I have a PICstart-Plus and, at work, a universal
programmer. Mostly, I do small, simple things that involve precise
timing. That is, my microcontroller projects are more electronics than
computers.
What is the current situation regarding cheap, easy-to-use chips and
development tools? Is the best choice still PIC and MPLAB? What about
free compilers? In particular, are the following well regarded?
|
Things have moved on considerably. Apart from the AVR mentioned by someone
else, 32 bit systems based on the LPC2000 Philips ARM chips are available,
and worth investigating: http://groups.yahoo.com/group/lpc2000/. Similar
devices are becoming available from Atmel.
Leon |
|
| Back to top |
|
|
Rich Webb
Guest
|
| Posted:
Fri Dec 24, 2004 7:56 am Post subject:
Re: The big picture - Cheap chips, cheap/free compilers? |
|
|
On Thu, 23 Dec 2004 13:09:11 -0500, "mc" <mc_no_spam@uga.edu> wrote:
[snip...snip...]
| Quote: | What is the current situation regarding cheap, easy-to-use chips and
development tools?
....
I am not particularly attached to the PIC architecture except that I have
quite a few chips on hand.
|
You should at least take a look at Atmel's AVR family. Very comfortable
to program in assembly (32 general purpose registers versus one working
register in the PICs) and a good fit for comiler writers so you have a
choice of several C compilers.
| Quote: | Also, where are the good, moderated, web-accessible forums for discussing
embedded design these days? The Usenet newsgroups seem to be dying.
|
There is an active user community operating out of the AVR Freaks site:
http://www.avrfreaks.net. (might be down for maintenance)
For general embedded info, http://www.embedded.com
--
Rich Webb Norfolk, VA |
|
| Back to top |
|
|
EventHelix.com
Guest
|
|
| Back to top |
|
|
mc
Guest
|
| Posted:
Fri Dec 24, 2004 10:43 am Post subject:
Re: The big picture - Cheap chips, cheap/free compilers? |
|
|
"Rich Webb" <bbew.ar@mapson.nozirev.ten> wrote in message
news:663ns01j8pu42ap5iv11ls0ufbenl1dp05@4ax.com...
| Quote: | On Thu, 23 Dec 2004 13:09:11 -0500, "mc" <mc_no_spam@uga.edu> wrote:
[snip...snip...]
What is the current situation regarding cheap, easy-to-use chips and
development tools?
...
I am not particularly attached to the PIC architecture except that I have
quite a few chips on hand.
You should at least take a look at Atmel's AVR family. Very comfortable
to program in assembly (32 general purpose registers versus one working
register in the PICs) and a good fit for comiler writers so you have a
choice of several C compilers.
|
Thanks. I was thinking about going over to AVR five years ago. As long as
I'm hacking assembly language it might as well be an easier assembly
language than PIC. I see also that there is a free BASCOM for AVR. |
|
| Back to top |
|
|
mc
Guest
|
| Posted:
Fri Dec 24, 2004 8:29 pm Post subject:
Re: The big picture - Cheap chips, cheap/free compilers? |
|
|
"Fred*" <tmp@mail.com> wrote in message
news:41cbc91c$0$24549$8fcfb975@news.wanadoo.fr...
| Quote: | You could also look at the Z8 Encore! family from Zilog.. really nice mcu
|
Thanks. Speaking of which...
How cheap are embedded PCs (DOS 8088-compatible systems) these days? That
would be my choice of system for developing anything complicated, because we
have such very good development tools (and I mastered them in the 1980s when
programming a real 8088 PC). |
|
| Back to top |
|
|
Paul Carpenter
Guest
|
| Posted:
Mon Dec 27, 2004 12:27 am Post subject:
Re: The big picture - Cheap chips, cheap/free compilers? |
|
|
On Thursday, in article
<41cb0e95$1@mustang.speedfactory.net> mc_no_spam@uga.edu
"mc" wrote:
| Quote: | Greetings,
I've done a good bit of microcontroller programming in the past but have
been mostly away from it for a few years. When last active, I was mostly
using PICs with MPLAB and assembly language, and some 8051-architecture
chips with ASM51. I have a PICstart-Plus and, at work, a universal
programmer. Mostly, I do small, simple things that involve precise timing.
|
That all depends on your definition of 'precise', one man's 'precise' is
another man's missed mars by 3 light years!
| Quote: | That is, my microcontroller projects are more electronics than computers.
|
LOTS and lots of microcontrollers have all sorts of built in timers to
greatly assist with this sort of timing issue for MOST cases, depending
on how precise you need to be.
| Quote: | What is the current situation regarding cheap, easy-to-use chips and
development tools? Is the best choice still PIC and MPLAB? What about free
compilers? In particular, are the following well regarded?
- HiTech PICC Lite (how well does it mesh with MPLAB?)
- BASCOM LT (for 8051; and for what else?)
- MikroBASIC for PIC (usable within MPLAB?)
- MikroPascal for PIC (usable within MPLAB?)
I am not particularly attached to the PIC architecture except that I have
quite a few chips on hand.
|
There are many manufacturers PIC and 8051 variants abound as do ARM chips
as well as other manufacturers TI, Atmel, Renesas, Zilog, Rabbit and many
others. What you need depends on your application requirements and
future enhancements.
| Quote: | I know all the major high-level programming languages (C, Basic, Pascal,
etc.) and have no qualms about using them; that is, there are none that I
intensely dislike.
|
One of the easiest ways to find tools for higher levels I find is start
at the GNU compilers see what architectures they support as an alternative
that assists at least evaluation of microcontroller WITHOUT huge expense.
| Quote: | Also, where are the good, moderated, web-accessible forums for discussing
embedded design these days? The Usenet newsgroups seem to be dying.
|
I have not found many web-accessible forums that have been much use to ME
other may have but then again I prefer to use the internet for when I
need to find things not be permanently glued to it, which web encourages.
| Quote: | Any advice and suggestions?
|
Search for microcontrollers on places like google and the like, search
for semiconductor manufacturers and what they produce, also look at
SBC and add on module manufacturers and see what controllers they use.
--
Paul Carpenter | paul@pcserviceselectronics.co.uk
<http://www.pcserviceselectronics.co.uk/> PC Services
<http://www.gnuh8.org.uk/> GNU H8 & mailing list info
<http://www.badweb.org.uk/> For those web sites you hate |
|
| Back to top |
|
|
Jonathan Kirwan
Guest
|
| Posted:
Mon Dec 27, 2004 2:47 am Post subject:
Re: The big picture - Cheap chips, cheap/free compilers? |
|
|
Not much written, so I'll add some comments....
On Thu, 23 Dec 2004 13:09:11 -0500, "mc" <mc_no_spam@uga.edu> wrote:
| Quote: | I've done a good bit of microcontroller programming in the past but have
been mostly away from it for a few years. When last active, I was mostly
using PICs with MPLAB and assembly language, and some 8051-architecture
chips with ASM51. I have a PICstart-Plus and, at work, a universal
programmer. Mostly, I do small, simple things that involve precise timing.
That is, my microcontroller projects are more electronics than computers.
|
Assembly coding remains a viable and excellent way to do your projects.
| Quote: | What is the current situation regarding cheap, easy-to-use chips and
development tools? Is the best choice still PIC and MPLAB? What about free
compilers? In particular, are the following well regarded?
|
You don't say how long you've been away and it's not clear whether your projects
are hobbyist or professional, issues such as price sensitivity (which can
eliminate choices such as Cygnal, for example) and power consumption (battery?),
but there are some excellent options out there. I haven't done a survey, but:
(0) I like Microchip a lot because of their support for me in the past. I work
in a small company and we don't purchase 10^5+ CPUs -- more in the 10^3 and
maybe 10^4, on occasion, per year. We are NOT big potatoes to them. But we've
received quite excellent and direct support when and where we've needed it.
I've been able to call up their support and talk with VERY SMART people who know
intimate details and are very logical and careful. Their chips include very
good brown out detection and often the kind of mix of features we need. Also,
they are broadly carried by Digikey. The ICE2000 system is excellent, but very
expensive -- but it's available if you need it. The cheaper programmers are
easily available through a variety of sources. Voltage ranges of operation are
from about 2.5V to 5.5V or so.
(1) The TI MSP430 chips are pretty easy to use and, from a hardware designer's
view, have some darned excellent features. Digikey carries many of them, in qty
1s, so they are easily accessible to those in the US and Canada. The
programmer/debugger pod is very cheap and appears to work pretty well using a
parallel port. I believe USB is in the market, or coming out soon. GNU C is
available, but so are some excellent compilers from folks who seem to support
their products well. I have some strong opinions about the instruction set
(which looks encouragingly similar to a PDP-11 instruction and yet is a
disappointing bastard of almost heart-breaking and wrong-minded compromise, to
me) but the hardware features are wonderful and the instruction set is 16-bit
and a whole lot nicer than the PIC. These don't operate above 3.6V (well, some
do -- but only the older ones.)
(2) The Atmel AVR chips are also pretty easy to use and I've enjoyed them a lot.
Their is a pretty nice programming board (no debugger, per se) that is the
STK500 (or some later incarnation) and includes a lot of sockets and buttons and
LEDs and is very handy and reasonably priced. There are (to me) newer
incarnations called the ATmega and ATtiny and I do not know if these have built
in debugger features -- they might. The instruction set is reasonably nice,
too. However, all of my support from Atmel has been terrible, without
exception. It has taken as long as 10 months to get two samples of an announced
chip -- and that was more than six months after they first started shipping
samples to "bigger customers." I have to go though a local FAE who then
forwards my questions back -- it can take several days to get my first return,
though it often happens in about one day. But this 1-2 day loop can lead to
extended discussions that simply take too long. I use Atmel only with the idea
that I cannot count on timely support -- because I'm far too small. It is my
impression that they don't even bother pretending that I'm worth caring about.
....
(I keep a supply of bubble-gum Atmel AT90s, PICs, and TI MSP430's laying around
for use.)
| Quote: | - HiTech PICC Lite (how well does it mesh with MPLAB?)
- BASCOM LT (for 8051; and for what else?)
- MikroBASIC for PIC (usable within MPLAB?)
- MikroPascal for PIC (usable within MPLAB?)
|
The 8051 still has that BASIC52 floating about. Not sure where it's been
ported, though. Might look around. I still have the free manual that Intel
used to give away for it. Nice.
| Quote: | I am not particularly attached to the PIC architecture except that I have
quite a few chips on hand.
I know all the major high-level programming languages (C, Basic, Pascal,
etc.) and have no qualms about using them; that is, there are none that I
intensely dislike.
|
Since you are talking more about small and precise timing things, I'd stick with
assembly. No matter what you choose, that's usually available, free, updated
regularly, works like clockwork, doesn't do unexpected things, etc. And you
have full control.
| Quote: | Also, where are the good, moderated, web-accessible forums for discussing
embedded design these days? The Usenet newsgroups seem to be dying.
|
Just do a search with google. You'll find them all that way, I think.
Jon |
|
| Back to top |
|
|
Jim Granville
Guest
|
| Posted:
Wed Dec 29, 2004 2:34 am Post subject:
Re: The big picture - Cheap chips, cheap/free compilers? |
|
|
mc wrote:
| Quote: | Greetings,
I've done a good bit of microcontroller programming in the past but have
been mostly away from it for a few years. When last active, I was mostly
using PICs with MPLAB and assembly language, and some 8051-architecture
chips with ASM51. I have a PICstart-Plus and, at work, a universal
programmer. Mostly, I do small, simple things that involve precise timing.
That is, my microcontroller projects are more electronics than computers.
What is the current situation regarding cheap, easy-to-use chips and
development tools? Is the best choice still PIC and MPLAB? What about free
compilers? In particular, are the following well regarded?
|
One thing that separates uC is on-chip debug.
Everyone these days has Flash, and simulators, but not
all have on chip debug.
If you already know the 80C51, then look at Silicon Labs,for the
C8051F family., These all have >=25Mips cores, high performance
Analog, and on Chip Debug. The C8051F330P is in a DIP20 package
Systems start from $25
Philips also have an expanding family of LPC900 80C51 variants,
with lower cost / lower performance point than SiLabs.
STm have the uCPSD34xx series, with USB and debug in early release.
Winbond have a HW-Debug 80C51 variant comming.
-jg |
|
| Back to top |
|
|
Darrel Johansen
Guest
|
| Posted:
Wed Dec 29, 2004 4:53 am Post subject:
Re: The big picture - Cheap chips, cheap/free compilers? |
|
|
| Quote: | One thing that separates uC is on-chip debug.
Everyone these days has Flash, and simulators, but not
all have on chip debug.
|
MPLAB supports MPLAB ICD 2 as an on chip debugger for PICmicros with flash
memory and dsPIC devices. |
|
| Back to top |
|
|
Oliver Betz
Guest
|
| Posted:
Wed Dec 29, 2004 7:58 am Post subject:
Re: The big picture - Cheap chips, cheap/free compilers? |
|
|
Jim Granville <no.spam@designtools.co.nz> wrote:
[...]
| Quote: | One thing that separates uC is on-chip debug.
|
ack.
[Silicon LabsC8051F family, LPC900 80C51 variants, uCPSD34xx]
but ist this "on-chip debug" like Motorola BDM, where you can access
memory (variables...) during program execution without affecting the
target (using CPU time)?
For example, the LPC2000 supports "realtime access" AFAIS with an
interrupt routine which makes it unusable for me because I have
several extremly time critical applications.
That's the reason why I love Motorola (Freescale) BDM - I can look at
the state of my target without affecting it. Invaluable!
Oliver
--
Oliver Betz, Muenchen (oliverbetz.de) |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in