SATA Controller and Hard Drive Enclosure recommendation
CASTalk.com Forum Index CASTalk.com
Discussion of DSP, FPGA, storage and embedded system.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web castalk.com
SATA Controller and Hard Drive Enclosure recommendation

 
Post new topic   Reply to topic    CASTalk.com Forum Index -> Storage System
Author Message
Dan Adams
Guest





Posted: Fri Oct 07, 2005 12:16 am    Post subject: SATA Controller and Hard Drive Enclosure recommendation Reply with quote

I seek purchase recommendations on a SATA RAID 5 controller and hard
drive enclosure that meets the following specs:

1. SATA II features (300MB/s, NCQ/TCQ, SMART, etc.)
2. Hot Swappable
3. Enclosure Management
4. Enclsoure has Four or Five Hard Drive bays and fits in three
consecutive 5.25" external bays.
5. Controller has at least 6 ports and PCI-X or better interface.
6. Support for 400Gb SATA II HD or larger.

Any suggestions?

Dan Adams
Back to top
daben
Guest





Posted: Mon Oct 10, 2005 12:15 am    Post subject: Re: SATA Controller and Hard Drive Enclosure recommendation Reply with quote

Dan

I am looking at the same type of questions for a storage server I am
building. Right now I am looking at Supermicro enclosures.
Specifically for my purpose I am looking at their 3u systems with 15
SATA hot swappable bays. They have a SATA backplane but you still need
to get a SATA controller. I am opting probably for 2x 3Ware SATA
controllers 8 ports each. The chasis I am looking at has no external
5.25" bays but I think they have a lot of selection. I would recommend
you at least look at supermicro and 3ware. I have used both extensively
in the past and have not had problems. But, I am open to suggestions
from others.

daben
Back to top
Dan Adams
Guest





Posted: Thu Oct 13, 2005 7:29 am    Post subject: Re: SATA Controller and Hard Drive Enclosure recommendation Reply with quote

Thanks for the feedback. Supermicro does offer an excellent selection
of chasis with hot swappable SATA HD bays however I prefer a just a
storage enclosure that fits into my existing servers. They do have a
five hard drive cannister that's high up on my shortlist.

BTW, are you going with the 3ware 9550SX?

Dan Adams
Back to top
Guest






Posted: Mon Oct 17, 2005 4:16 pm    Post subject: Re: SATA Controller and Hard Drive Enclosure recommendation Reply with quote

Have you looked at Promise?
Back to top
 
Post new topic   Reply to topic    CASTalk.com Forum Index -> Storage System All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




VoIP Electronics Powered by phpBB