Johnson
Guest
|
 Posted:
Wed Dec 01, 2004 10:10 pm Post subject:
Compact Flash Peripheral Design with FPGA |
|
|
Hello,
I am currently involved in designing a Compact Flash Peripheral --- a
GPS Receiver for TDS Recon or PocketPC. The power consumption is very
critical. Does anybody know any xilinx parts have requirements close
to or less than 100mA?
Could anybody please let me know the advantages to use FPGA for the CF
peripheral, other than a DSP or ASIC? You know the price is quite
different.
Is it important for the CF GPS Receiver to support all three modes of
CF (Memory, I/O, and True IDE)? If we want to support all 3 modes,
which one is a better choice for the project, FPGA or DSP?
Could anybody please
Thank you very much in advance.
Johnson |
|
Amontec, Larry
Guest
|
| Posted:
Wed Dec 01, 2004 11:01 pm Post subject:
Re: Compact Flash Peripheral Design with FPGA |
|
|
Johnson wrote:
| Quote: | Hello,
I am currently involved in designing a Compact Flash Peripheral --- a
GPS Receiver for TDS Recon or PocketPC. The power consumption is very
critical. Does anybody know any xilinx parts have requirements close
to or less than 100mA?
Could anybody please let me know the advantages to use FPGA for the CF
peripheral, other than a DSP or ASIC? You know the price is quite
different.
Is it important for the CF GPS Receiver to support all three modes of
CF (Memory, I/O, and True IDE)? If we want to support all 3 modes,
which one is a better choice for the project, FPGA or DSP?
Could anybody please
Thank you very much in advance.
Johnson
|
Hi Johson,
For your work, FPGA and CPLD devices are not the good choice : very
expensive and very bad for critical consumption applications.
You have to work with a low power cpu like a simple PIC or an AVR (8 to
16 bits).
We have done an datalogger application using a CF and a PIC cpu. This
application emulate Memory read/write access from/to the CF via the IO
ports of the PIC. Also, we have a file system in the PIC cpu able to
read and to write and manage different files in the CF.
Also, you will be able to emulate TRUE IDE from the PIC IO port if it is
needed.
The choice of the cpu will be depending about the rest of the design.
Actually, we are starting a new datalogger using a Philips ARM 7 PLC2106
(32 bit cpu) + CF + many AD/DA. In this new project, a 32 bit cpu is
important because we need to process many external inputs/outputs.
(also, we are thinking to use an CPLD for accelerating some processing JOB)
For a GPS receiver application, a 8bit or 16 bit cpu will be enough ->
low cost and low power.
NOTE: we done last year an application with GPS Receiver. Also, we may
design your application very quickly merging our know-how from our two
precednet projects : CF file system + GPS receiver.
Best regards,
Laurent Gauch
www.amontec.com |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in